Floor Standing Enclosures
Manufacturer, Supplier, Exporter of Floor Standing Enclosures, Wall Mounting Enclosures, Floor Standing Enclosure, Floor Standing Enclosures, Wall Mounting Enclosure, Standard Qubical Panels, Standard Qubical Panel, Standard Panel, Standard Panels, Terminal Box, Terminal Boxes, MCB Box, MCB Boxes, Transformer Mounting Panel, Transformer Mounting Panels, PLC Panel, PLC Panels, ST Panel, Pune, Maharashtra, India
We are Manufacturer, Supplier, Exporter of Floor Standing Enclosures and our setup is situated in Pune, Maharashtra, India.
Material :
• Frame : 1.5 mm CRCA steel.
• Door : 2 mm CRCA steel.
• Rear, roof and side panels : 1.5 mm CRCA steel.
• Mounting plate : 2 mm galvanized steel.
• Bottom plates : 2 mm galvanized steel.
• Gasket : Sealing is ensured by an 20 X 3 gasket products.
• Frame : Seam welded reversed open profiles with 8 mm square hole pattern. Including integrated external hole pattern.
• Door : Mounted with four hinges allowing left or right hand opening. Including dear frame with 25 mm hole pattern.
• Rear panel : Fitted by M6 torx screws. Standard facilities for rear door mounting.
• Side panels : Supplied as an accessory.
• Roof panel : Removable / Welded.
• Lock : 3 point locking system. Does not interfere with the enclosure inner space. Standard Flat rod type.
• Bottom plates : Consists of three or four pieces.
• Side panels : Double folded and slides into position. Adjustable in depth by steps of 15 mm. Supplied outside of the enclosure packaging.
• Earthing : All panels are earthed through their fittings and arc equipped with a separate earthing stud.
• Finish : Our standard 7035. Colour - As per your requirements.
• Lock : 3 point locking system. Does not interfere with the enclosure inner space. Standard Flat rod type.
• Bottom plates : Consists of three or four pieces.
• Mounting plate :Single folded and adjustable in depth by steps of 25 mm.
• Earthing : All panels are earthed through their fittings and arc equipped with a separate earthing stud.
• Protection : Complies with IP 40 | 41.
• Frame : 1.5 mm CRCA steel.
• Door : 2 mm CRCA steel.
• Rear, roof and side panels : 1.5 mm CRCA steel.
• Mounting plate : 2 mm galvanized steel.
• Bottom plates : 2 mm galvanized steel.
• Gasket : Sealing is ensured by an 20 X 3 gasket products.
• Frame : Seam welded reversed open profiles with 8 mm square hole pattern. Including integrated external hole pattern.
• Door : Mounted with four hinges allowing left or right hand opening. Including dear frame with 25 mm hole pattern.
• Rear panel : Fitted by M6 torx screws. Standard facilities for rear door mounting.
• Side panels : Supplied as an accessory.
• Roof panel : Removable / Welded.
• Lock : 3 point locking system. Does not interfere with the enclosure inner space. Standard Flat rod type.
• Bottom plates : Consists of three or four pieces.
• Side panels : Double folded and slides into position. Adjustable in depth by steps of 15 mm. Supplied outside of the enclosure packaging.
• Earthing : All panels are earthed through their fittings and arc equipped with a separate earthing stud.
• Finish : Our standard 7035. Colour - As per your requirements.
• Lock : 3 point locking system. Does not interfere with the enclosure inner space. Standard Flat rod type.
• Bottom plates : Consists of three or four pieces.
• Mounting plate :Single folded and adjustable in depth by steps of 25 mm.
• Earthing : All panels are earthed through their fittings and arc equipped with a separate earthing stud.
• Protection : Complies with IP 40 | 41.
